A small part of the actual alloy is machined off to create this finish. It is then lacquered over to prevent corrosion. You will be able to see if your wheel is diamond cut if on close inspection you see very fine lines created by the cutting machine and the appearance is very shiny.
How do I know if my alloys are diamond cut?
If the wheel is two-tone, with a darker inner and a silver outer, then it is highly likely to be a diamond cut alloy wheel (left-hand side photo). This type of wheel has a machine turned face over a painted background.
What are diamond cut alloys?
A diamond cut alloy wheel is one that has been put on a lathe and part of or the entire painted surface of the wheel is machined off to leave a shiny alloy finish. … It is then lacquered to prevent corrosion of the wheel.
How do you look after Diamond cut alloys?
They should be cleaned with a mild shampoo. Do not use acid or alkaline-based wheel cleaners – this will help to avoid any discolouration of the wheel. Diamond cut wheels also generally have pretty harsh edges so it’s best to use an air blower (if you have one), rather than cloths.
Is it worth refurbishing diamond cut alloys?
Diamond cut alloys add appeal and luxury to the appearance of new vehicles. However, many owners will be unaware that these alloys are more difficult to repair. Diamond-Cut alloys cannot be repaired at home, as they require a lathe to be refurbished.
How much does it cost to repair diamond cut alloys?
At Diamond Alloys, a diamond cut alloy repair starts from as little as £72.50 per wheel when you have all 4 alloy wheels refurbished at the same time. This price includes a full strip down, powder coat, diamond cut and lacquer before being balanced and refitted.
Can you touch up diamond cut alloys?
Diamond cutting is a very precise process and takes longer to reproduce than a powder coat refurbishment. The refurbishment of a diamond cut wheel is impossible to do as a touch up/ mobile as it requires the use of lathe.
How long does it take to refurb diamond cut alloys?
How long will the process take to repair my wheels? The complete alloy wheel refurbishment process normally takes around 3-4 business days for standard finish For Diamond Cut Finish…
How many times can you diamond cut alloys?
Diamond cutting alloys can be performed more than once
Sometimes, wheels can be cut twice or even three times if need be, whereas other wheels should never be exposed to the process of diamond cutting after going through it once.
Are diamond cut alloys better?
The look of diamond cut alloys comes with a finish which is higher in shine and resembles a DVD finish. Whereas it is the fine grooves that give a DVD a higher shiny finish, smaller grooves have a similar effect on the alloy wheels.
Do I need a dedicated wheel cleaner?
This is pretty much spot on, yes you do need one if you have a car that produces lots of brake dust, say a diesel or a heavy car but as mac correctly said, if you take the wheels off and clean them properly, decontaminate them and seal them with either a good wheel wax or a dedicated wheel sealant, then just soapy …
Are Mercedes alloys diamond cut?
A number of premium manufacturers such as BMW, Volkswagen, Mercedes, Audi and Nissan will tend to issue their leading models with diamond or laser cut wheels fitted as standard. As shown in the picture, you will see an example of a diamond cut wheel issued by Volkswagen.
Are painted rims durable?
Paint vs Powder-Coated Wheels
Paint is more susceptible to scratching and chipping. Less durable. Premature corrosion from road conditions. The short-term solution, no long term benefits.
Is it worth getting my alloys refurbished?
If your alloys are starting to corrode, then our advice would be to get them refurbished ASAP. … The longer you leave the corrosion the more likely it will come back. If you get them refurbished at the early stages of corrosion appearing you have more of a chance of delaying the inevitable.
Can badly damaged alloys Be Fixed?
An alloy wheel repair can breathe new life into a car. … This means there is no need to remove the alloy from the body of the car in order to restore its condition. Alloy wheels are restored by carefully sanding the area to remove the damage, such as a kerb scuff or chips to the alloy trim.
Can badly damaged alloys be repaired?
But alloys can quickly be repaired at home or by an alloy repair specialist. Scratching your alloy wheels on the kerb shouldn’t affect the driving of your car. However, it can make your vehicle look old and unloved. We know how much you love your car, so it’s best to get any alloy scuffs repaired by a professional.