What are some good general work and safety practices when dealing with clothing and jewelry?

The use of all power equipment and machinery requires the following: tie back hair, secure loose clothing, remove dangling jewelry, wear safety glasses/goggles, wear proper personal protective equipment if appropriate, check that all safety guards and tool rests are secure and in place, and make sure the work area is …

What are 5 general shop safety rules?

Shop Safety

  • Everyone must wear safety glasses in a shop environment. …
  • Check your clothes and hair before you walk into the shop. …
  • No loose clothing. …
  • Wear appropriate shoes. …
  • Be aware of what’s going on around you. …
  • Concentrate on what you’re doing. …
  • Don’t hurry. …
  • Listen to the machine.


What are the hazards involved in wearing Jewellery while working around high current wiring system?

When the shock is so severe, it could cause you to go into cardiac arrest. What some people may not know, is that the items you wear as an electrician can cause electrical shock. These items can include jewelry, keys, glasses and even some of your clothes.

THIS IS INTERESTING:  Frequent question: How much does a diamond seller make?

What is basic shop safety?

Make sure you are properly trained on any piece of equipment before you use it. Wear appropriate clothing and personal protective equipment: Long pants, closed-toe shoes, side shield safety glasses. Pull back and secure long hair. No lanyards, loose clothing or jewelry.

What is the proper term used for safety gear in the shop?

7 types of personal protective equipment (PPE) to guarantee your safety.

What are some safety rules?

General Precautions

  • Your safety is your personal responsibility.
  • Always follow the correct procedures.
  • Never take shortcuts.
  • Take responsibility and clean up if you made a mess.
  • Clean and organize your workspace.
  • Ensure a clear and easy route to emergency exits and equipment.
  • Be alert and awake on the job.

How can you be safe in a work shop?

Check that:

  1. you keep the workshop tidy and avoid tripping hazards such as trailing cables, tools etc;
  2. welding gas bottles are secured upright, and when in use can be moved easily on a trolley;
  3. battery charging is done in a well-ventilated area away from sources of ignition such as welding flames or angle grinding;


What kinds of jewelry should be taken off when working in the shop?

All jewelry should be removed when you are working around live circuitry. Metal conducts electricity, and an electrical charge through a ring or metal watch band can be extremely hazardous. Severe burns can result.

Why should you not wear jewelry in the work area?

Jewelry can create several safety hazards for those working around chemicals. A spilled or splashed caustic chemical can get under a ring or watchband, burning or irritating the skin.In addition some chemicals, particularly chlorine and ammonia, can damage silver or gold jewelry.

THIS IS INTERESTING:  Your question: What colors go good with ruby red?

Should electricians wear rings?

Rings are nice, but electricians and many other workers should not wear them on the job. A metal ring is very low in resistance and can carry huge currents even at low voltages. The man’s finger could be burned right off his hand from even a low voltage 6-volt supply.

Why is shop safety important?

A safe and healthy workplace not only protects workers from injury and illness, it can also lower injury/illness costs, reduce absenteeism and turnover, increase productivity and quality, and raise employee morale. In other words, safety is good for business. … Increased workers’ compensation insurance costs.

What are the four types of potential shop hazards?

General Shop Hazards

  • Chips from machining operations.
  • Shrapnel from broken tools.
  • Chemicals splashed in eyes – chemical fumes.
  • Welding radiation.
  • Impact with protruding stock.

What are the safety practices inside a machine shop?

Choose proper personal protective equipment (PPE) for the machine shop. Wear safety glasses at all times in the shop. At any time, debris may fly out of a machine and into your eye. Consider a face shield when you are working up close with grinding and cutting job tasks.

What are 5 types of PPE?

5 Types of Personal Protective Equipment (PPE)

  • Head Protection. …
  • Hearing Protection. …
  • Eye and Face Protection. …
  • Respiratory Protection. …
  • Hand Protection.

What are 3 examples of PPE and when should they be used?

Personal protective equipment, commonly referred to as “PPE”, is equipment worn to minimize exposure to a variety of hazards. Examples of PPE include such items as gloves, foot and eye protection, protective hearing devices (earplugs, muffs) hard hats, respirators and full body suits.

THIS IS INTERESTING:  Best answer: Why a diamond sparkles more than a glass crystal of the same shape and size?

What are 5 PPE?

PPE includes gloves, gowns, laboratory coats, face shields or masks, eye protection, resuscitation masks, and other protective gear such as hats and booties.

Shine precious stones