Available in 4′ x 8′, 4′ x 10′ and different size sheets. 1/8″, 3/16″ and 1/4″ thick.
What size is Aluminium diamond plate?
6061-T6
| Thickness In Inches | Size in Inches | Weight per Sq. Ft. in Lbs. |
|---|---|---|
| 3/16 | 60 x 192 | 2.8 |
| 1/4 | 48 x 192 | 3.7 |
| 1/4 | 60 x 192 | 3.7 |
| 3/8 | 48 x 192 | 5.4 |
How is diamond plate thickness measured?
material thickness, as measured from the top of the diamond to the bottom of the material, but only 1⁄8 in. as measured from the flat portion between the diamonds to the bottom side of the sheet.
What does 1/8 aluminum diamond plate weigh?
Aluminum Diamond Plate
| Item # | Thickness | Weight per Square Ft. |
|---|---|---|
| ADP 1/8-48 x 96 | 0.125 in | 2.000 lb |
| ADP 1/8-48 x 192 | 0.125 in | 2.000 lb |
| ADP 1/8-60 x 192 | 0.125 in | 2.000 lb |
| ADP 3/16-48 x 96 | 0.188 in | 3.000 lb |
How much does a sheet of diamond plate weight?
Steel Diamond Plate
| Item # | Thickness | Weight per Square Ft. |
|---|---|---|
| DP 16 | 16 ga | 3.000 lb |
| DP 14 | 14 ga | 3.75 lb |
| DP 1/8 | 1/8″ | 6.16 lb |
| DP 3/16 | 3/16″ | 8.70 lb |
Is diamond plate aluminum or steel?
Diamond plate is typically made of metal. The most popular types of metal used for diamond plate are aluminum, steel and stainless steel. In addition to diamond plated metal, plastic can also be used to create interlocking diamond plate sheets.
What thickness is 11 gauge?
15 U.S. Code § 206. Standard gauge for sheet and plate iron and steel
| Number of gauge | Approximate thickness in fractions of an inch | Weight per square foot in kilograms |
|---|---|---|
| 9 | 5/32 | 2.835 |
| 10 | 9/64 | 2.552 |
| 11 | 1/8 | 2.268 |
| 12 | 7/64 | 1.984 |
Can diamond plate be bent?
Although aluminum diamond plate is a soft metal, problems arise when attempting to bend the thick aluminum. The stress of bending the diamond plate causes cracks to form at the bend location. Softening the aluminum at the bend location will eliminate cracking and increase the tightness of the bend.
How much does a 4×8 sheet of 3/16 steel weigh?
Plates
| Standard | |
|---|---|
| Thickness | Weight Per Square Foot |
| 3/16 inches | 7.66 |
| 1/4 | 10.21 |
| 5/16 | 12.75 |
How much does a 4×8 sheet of diamond plate weigh?
» For 5 sheets or more, call 1.888. 98.
…
How much does a 4×8 aluminum plate diamond weigh?
| Item # | Thickness | Weight per Square Ft. |
|---|---|---|
| ADP 3/16-48 x 96 | 0.188 in | 3.000 lb |
How thick should a diamond plate be for a trailer?
The most popular thicknesses would be 0.188″ (3/16″) or 0.125″ (1/8″), and even 0.25 (1/4″). So it all depends on the flooring you put down before. Always take that into consideration when determining the thickness you need.
…
How thick is a trailer floor?
| Diamond Floor Plate | |
|---|---|
| Thickness | Weight Per Square Foot |
| 3/16 | 8.70 |
| 1/4 | 11.25 |
What alloy is aluminum diamond plate?
Aluminum Diamond Plate: Aluminum alloys are frequently formed into diamond plate. 6061-T6 aluminum is used often because of its corrosion resistance as well as its excellent structural properties. 3003 aluminum is also used, although it is more noted for its luster and aesthetic appeal.
What is the cost of Aluminium sheet?
Aluminium Sheet at Rs 150/kilogram | Aluminum Sheets | ID: 11007783112.
What do aluminum checker plates weigh?
Aluminum Tread Plate
| Thickness* Inches | Size Inches | Weight per Sq. Ft. Lbs. |
|---|---|---|
| 3/16* | 60 x 192 | 2.80 |
| 1/4* | 48 x 192–60 x 192 | 3.70 |
| 1/4* | 48 x 192 | 3.70 |
| 1/4* | 60 x 192 | 3.70 |