The red-colored section of the NFPA Diamond is located at the top or twelve o’clock position of the symbol and denotes a material’s flammability and susceptibility to catching fire when exposed to heat. Flammability is graded on a 0 to 4 scale, and a lower rating is safer.
What do the numbers mean on the NFPA diamond?
The National Fire Association (NFPA) has developed a color-coded number system called NFPA 704. The system uses a color-coded diamond with four quadrants in which numbers are used in the upper three quadrants to signal the degree of health hazard (blue), flammability hazard (red), and reactivity hazard (yellow).
What does the white color on the NFPA diamond stand for?
The four divisions are typically color-coded with red on top indicating flammability, blue on the left indicating level of health hazard, yellow on the right for chemical reactivity, and white containing codes for special hazards.
What does 4 represent in the NFPA 704 Diamond?
Number System: NFPA Rating and OSHA’s Classification System 0-4 0-least hazardous 4-most hazardous 1-4 1-most severe hazard 4-least severe hazard • The Hazard category numbers are NOT required to be on labels but are required on SDSs in Section 2. … Acute hazards are more typical for emergency response applications.
How is NFPA rating calculated?
The ratings range from 0 to 4. A rating of 4 is the highest. If a 4 is in the red section of the hazard rating system, then the material should be considered highly flammable and therefore dangerous. Within the NFPA hazard rating system, there is also a white colored section.
What does NFPA mean?
The National Fire Protection Association (NFPA) is a global self-funded nonprofit organization, established in 1896, devoted to eliminating death, injury, property and economic loss due to fire, electrical and related hazards.
What does 3YE mean?
For motor spirit with UN number 1203, the HAZCHEM code is 3YE, and this would mean: For motor spirit with UN number 1203, the HAZCHEM code is 3YE, and this would mean: 3- Use Foam only. Y- Can be violently (V) reactive or explosive. Breathing apparatus plus protective gloves to be used in case of fire.
What is a NFPA label?
NFPA 704 is a labeling system used to identify hazardous materials. It is published by the National Fire Protection Association (NFPA). … NFPA diamond labels can be used on any type of chemical container to alert people to the specific hazards present.
Are NFPA diamonds required?
NFPA 704 labels are required when another Federal, state or local regulation or code requires their use. NFPA 704 does not specify when a container, tank or facility must label with the 704 diamond.
Where should NFPA diamonds and labels be?
Positioning NFPA Diamond Labels
In general, it goes on the upper half of the truck so that it is the most visible, but that is not strictly required. When placing labels on containers, it is simply necessary to place them in such a way as to ensure they are easily visible.
What does Level 4 flammability hazards indicate?
Risk level 4: Very flammable gases or very volatile flammable liquids. Shut off flow and keep cooling water streams on exposed tanks or containers. Risk level 3: Materials that can be ignited under almost all normal temperature conditions. Water may be ineffective because of the low flash point.
What does the R stand for in ERG?
Emergency Response Guide. What does the R stand for in ERG? Safety of responders.
What is the dangerous goods class for organic peroxide?
Class 5 – Oxidizers; Organic Peroxides
Oxidizers are defined by dangerous goods regulations as substances which may cause or contribute to combustion, generally by yielding oxygen as a result of a redox chemical reaction.
Is 3 m HCL dangerous?
Hazard statements: May be corrosive to metals Causes severe skin burns and eye damage May cause respiratory irritation Causes serious eye damage Precautionary statements: If medical advice is needed, have product container or label at hand Keep out of reach of children Read label before use Keep only in original …
What is the NFPA rating for health?
Chemical substances are rated for degree of HEALTH RISK (blue diamond), FLAMMABILITY (red diamond), REACTIVITY (yellow diamond), on a scale of 0 to 4. The white diamond is used to indicate the presence of large quantities of chemicals possessing unusual water reactivity (W) or oxidative capability (oxy).
What are the 9 DOT hazard classes?
The nine hazard classes are as follows:
- Class 1: Explosives.
- Class 2: Gases.
- Class 3: Flammable and Combustible Liquids.
- Class 4: Flammable Solids.
- Class 5: Oxidizing Substances, Organic Peroxides.
- Class 6: Toxic Substances and Infectious Substances.
- Class 7: Radioactive Materials.
- Class 8: Corrosives.